Beneficiation Equipment
Total 82 Product(s)
Shanghai Vostosun Industrial Co., Ltd is a professional Beneficiation Equipment manufacturer and exporter in China. We are specializing in Beneficiation Equipment. These products have been delivered to Europe, United States, Asia, the Middle East, Russia, Africa etc. We are expanding more cooperation partners all over the world.
View: 
Working Principle: Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together.
Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materials and hot air mix together. Materials go to the lower side by gravity when the barrel rotates.
Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line.
Lifters on the inner side of barrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line. Materials enter the barrel from the higher side.
Sand dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industry and coal in coal mine, etc. Sand dryer can be widely used to dry various materials, and it is simple to be operated.Materials are sent to hopper of rotary dryer by belt conveyor or bucket elevator. The barrel is installed with slope to horizontal line.
Belt Magnetic Separator is used to eliminate the powder or massive waste iron from the nonmagnetic material. The inner adopts the special resin to cast with wholly sealed structure. It features with deep revealed magnetic depth, strong magnetic force, dust-protection and rain-protection, erosion wearing and so on.
China Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. We can provide magnetic separators of forward flow, semi counter flow and counter flow types according to customers' request.
Cross Belt Magnetic Separator is used to eliminate the powder or massive waste iron from the nonmagnetic material. The inner adopts the special resin to cast with wholly sealed structure. It features with deep revealed magnetic depth, strong magnetic force, dust-protection and rain-protection, erosion wearing and so on.
Drum magnetic separator is used for recovery of ferro magnetic ores. It is designated for wet magnetic separating of material with granularity below 3mm, such as magnetite, pyrrhotine, roasted ore and washingtonite. There are three different tank designs. (Concurrent, counter-current and counter-rotation).
Dry Magnetic Separator can be used in the pre-selection of low grade ore, and so it saves operation time and reduces the cost of dressing. This series is widely applied in refractory materialceramicsmetallurgycement and etc. It is specially used to refine iron ore and recycle tailings.
VSS High Gradient Magnetic Separator is specially designed for weak magnetic mineral beneficiation or removal of ferrous impurity from non-metallic minerals. It is widely used for processing fine, feebly magnetic minerals, such as hematite, limonite, ilmenite, wolframite, and also for purifying non-metallic minerals, such as quartz, feldspar,etc.
High intensity magnetic separator is usually used for sorting the fine-grained strong magnetic minerals, or removing strong magnetic minerals from non-magnetic minerals. With a deep magnetic field, the machine can make a continuous row of ore feeding and discharge. It also has enough working clearance and high processing capabilities.
Low Intensity Magnetic Separator features: -Improve the grade by 4-6% -Improve the recovery rate by 8% -Increase capacity by 12%
Low intensity magnetic separator is used for recovery of ferro magnetic ores. There are three different tank designs, (concurrent, counter-current and counter-rotation), generally using a common magnetic drum assembly.
Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc.
Features:
1.High magnetic intensity.
2.Low energy consumption.
3.Good beneficiating efficiency.
4.Simple structure and easy maintenance.
Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc. We can provide magnetic separators of forward flow, semi counter flow and counter flow types according to customers' request.
We are professional magnetic separator manufacturer. Magnetic Separator is used to separate magnetite, hematite, limonite, pyrrhotite, ilmenite smaller than 3 mm in wet way. It is also used to separate iron in coal, nonmetallic ore, construction industry, etc.
Features:
1. High magnetic intensity.
2. Low energy consumption.
3. Good beneficiating efficiency.
4. Simple structure and easy maintenanc
Permanent Magnetic Separator is widely used in wet separation of magnetite,pyrrhotite,calcined ore,ilmenite with particle size less than 3mm, and also removal of iron from coal, non- metallic minerals, building materials and etc. This series features of stable magnetic intensity and low breakdown ratio.
Roll magnetic separator features:
1.Various magnetic field intensity,
2.Robust structure,
3.High reliability,
4.Low cost,
5.Short magnetic circuit,
6.Little magnetic flux leakage,
7.High magnetic intensity,
8.Low energy consumption.
Technical Parameter:
This series of magnetic separator features of low magnetic power consumption, low operation cost; low current operation, low breakdown ratio and easy to maintenance; well-distributed background magnetic intensity of over 1T; corrosion-resistant stainless steel cooling water pass.
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
Chinese
